Austenitic steels X5CrNi18-10 1.4301 304 EN 10088-2 / DIN 17441 X4CrNi18-12 1.4303 305 EN 10088-2 / DIN 17441 X2CrNi19-11 1.4306 304L EN 10088-2 / DIN 17441 X10CrNi18-8 1.4310 301 EN 10088-2 / DIN 17224 X12CrMnNi17-7-5 1.4372 201 EN 10088-2 / DIN 17441 X5CrNiMo17-12-2 1.4401 316 EN 10088-2 / DIN 17441 X2CrNiMo17-12-2 1.4404 316L EN 10088-2
Austenitic 201 stainless steel - BBN STEELAUSTENITIC SERIES stainless steel 201 with material number 1.4372 complies with European standard EN 10028-7/ EN10088-2. 201 Stainless steel, has a certain acid resistance, alkali resistance, high density, polishing no bubbles, no pinholes, etc.,
BS EN 10088-3:2014 Stainless steels Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes; BS EN 10088-1:2014 Stainless steels List of stainless steels; BS EN 485-2:2016+A1:2018 Aluminium and aluminium alloys. Sheet, strip and plate Mechanical
BS EN 10088-3:2014 Stainless steels. Technical delivery Chemical composition was changed for following grades:austenitic grade 1.4597, austenitic-ferritic grade 1.4362; Standard inspection document is now a test report 2.2 according to BS EN 10204; Mechanical values changed for austenitic grade 1.4372, for martensitic grades 1.4313, 1.4028, 1.4122, 1.4057 and for precipitation hardening grade 1.4606
Chemical composition of stainless steel flat products for Introduction BS EN 10088-2 is the material standard for stainless steel sheet, plate and strip for general purposes. A total of 97 stainless steel grades are listed, including 25 ferritic, 14 martensitic, 2 precipitation hardening, 44 austenitic and 12 austenitic-ferritic (duplex) grades.
EN 10088-2 is the material standard for stainless steel sheet, plate and strip for general purposes. This article gives the 0.2% and 1.0% proof strength, tensile strength and elongation of the 40 austenitic grades specified. The standard also specifies includes impact properties and resistance to intergranular corrosion acceptance criteria.
Stainless Steel When Health Comes First2.2 Categories of stainless steels The stainless steel family tree has sever-al branches which ma y be differentiated in a variety of ways, but usually and most accu-rately by the metallurgical phases present in their microscopicstructures. According to (1) there are four groups: Austenitic stainless steels, Austenitic-ferritic
Stainless Steel:Tables of Technical Properties1 Chemical composition of stainless steels (flat products) 2 Mechanical properties of stainless steels Chemical and physical properties are in accordance with EN 10088-1:2005 Mechanical properties are in accordanc e with EN 10088-2:2005, except for he 1.4372 201 0,15 1,00 5,50 to 7,50 0,045
A titanium-stabilized austenitic stainless steel with improved intergranular % according to EN 10088-2 minimum values Low-nickel stainless steel Core 201/4372 1.4372 201 S20100 17 Core 201LN/4372 1.4372 201LN S20153 19 Nickel-free stainless steels
Stainless steels for extremely corrosive environmentsA high-nickel and molybdenum austenitic stainless steel with very high corrosion resistance. Ultra 904L was originally developed for handling sulfuric according to EN 10088-2 minimum values for cold rolled strip. 1) According to ASTM A240. 2) 201/4372 Core 304/4301 Moda 430/4016 Core 304L/4307 Core 304L/4306 Core 305/4303 Core 347/4550
Stainless steelsEN 10079:2007, Definition of steel products EN 10088-1:2014, Stainless steels Part 1:List of stainless steels EN 10163-2, Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections Part 2:Plate and wide flats EN 10168, Steel products Inspection documents List of information and description
1.4372. France AFNOR NF EN 10088-1 NF EN 10088-2 NF EN 10088-3 NF EN 10088-4 NF EN 10088-5 NF EN 10151 1.4372 Stainless steel strip for springs - Technical delivery conditions and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.